Signature Marketing & BannersNov 21, 202611 min read

Email Signature Banner Size: Choose the Right Dimensions for Campaigns

Choose an email signature banner size for campaign clarity with practical desktop, mobile, export, and rendering guidance.

SG

Sophie Grant

Email Signature Specialist, Scribe

Choose the banner size by placement and campaign role

An email signature banner needs a role-specific size because a compact call-to-action strip has a different job from a general marketing-email header or hero image. Your first decision is therefore not a single universal dimension. Decide how much space the campaign message needs, how much room the signature provides, and whether the asset will appear beside contact details or as a larger email element.

A campaign team can use the following starting points when the placement is clear:

Placement and role Display dimensions Practical use
Signature CTA banner 320-600 × 60-120 pixels A compact action inside the signature
Compact marketing-email header 600 pixels wide × 150-200 pixels high A restrained header with room for branding
Marketing-email hero image 600 pixels wide × 300-400 pixels high A larger campaign message in the email body

These dimensions describe different placements, not interchangeable versions of the same asset.

A signature CTA banner should usually begin with the compact range because the signature already contains identity and contact information. A 320-600 pixel display width and 60-120 pixel height gives you room to select a proportion that fits the available signature area without treating the banner like a hero image. A 600-pixel width is a common starting point for HTML marketing emails, but it is not a universal requirement. Use the signature placement, rather than the larger email canvas, to set the first draft.

Use 650 × 100 pixels as the desktop starting point

A 650 × 100 pixel canvas is a practical desktop starting point for an email signature campaign banner. The 650-pixel figure measures display width, while the 100-pixel figure measures display height. This widely accepted standard is described as balancing visibility and aesthetics, and a banner no more than 650 pixels wide and 90-150 pixels high is described as viewable without dominating the signature.

An email signature banner can use the 90-150 pixel height range when the campaign message needs more or less vertical room than the 100-pixel starting point. Use the lower end for a short promotion with a simple action. Move toward the upper end only when the message remains readable and the surrounding signature still has enough space. The 90-150 pixel range measures the banner itself, not the full signature.

Broader email-signature guidance describes standard dimensions as generally ranging from 600-800 pixels wide and 90-300 pixels high, while custom dimensions often fall between 300-700 pixels wide and 70-200 pixels high. Those broader ranges are useful for understanding the available design space, but they do not replace the more restrained campaign starting point. For a signature CTA, begin near 650 × 100 pixels and change the dimensions only when the placement or message requires it.

Use this desktop decision sequence:

  1. Start at 650 pixels wide by 100 pixels high.
  2. Keep the banner within 600-650 pixels wide when the signature container allows that width.
  3. Choose a height between 90 and 150 pixels when the campaign message needs adjustment.
  4. Reject the larger dimensions used for a general hero image unless the asset is no longer functioning as a signature CTA.

Treat these dimensions as a starting decision that still requires rendering validation.

An infographic showing desktop email signature banner dimensions: 650 pixels starting display width, 100 pixels starting display height, and a 90-150 pixel adjustable banner height. It presents the restrained campaign starting point and height range.
Start near 650 × 100 pixels, then adjust height only when the message needs it.

Match the display width to the signature container

An email signature container determines the final display width more reliably than an assumed canvas. Match the banner width to the actual email content container so the image does not extend beyond the signature area or leave an awkward gap beside the surrounding details. A 600-pixel width is a common starting point for marketing emails, but it is not a universal requirement.

A 600-pixel-wide header banner is commonly paired with 150-200 pixels of height, a 600-pixel-wide promo strip with 60-120 pixels of height, and a 600-pixel-wide body banner with 200-400 pixels of height. These figures measure display dimensions for distinct email placements. A signature campaign normally aligns more closely with the promo-strip proportions than with the body-banner proportions because the signature has less vertical space.

Before finalizing the creative, compare the proposed width with the narrowest signature layout used in the campaign. If the available container is narrower than 650 pixels, reduce the display width rather than allowing the image to dictate the layout. If the container is close to 600 pixels, a 600-pixel display width can be a workable starting point. The final choice belongs to the available container, not to a dimension copied from a different email placement.

Display size and export size are separate decisions. For sharper high-density screens, you can export a 2× image at 1,200 pixels wide and display it at 600 pixels. The 1,200-pixel figure measures the exported file width, while the 600-pixel figure measures the width shown in the signature. Keep the displayed width matched to the container even when the source file is larger.

Prepare a narrower mobile-safe version

A mobile email signature needs a narrower version of the desktop starting point. One rule of thumb places desktop banners at 600-700 pixels wide and 90-200 pixels high, while mobile banners use 320-385 pixels wide and up to 100 pixels high. A separate mobile email-signature guide describes 320 pixels wide as a mobile target because mobile device screens typically range from 320 to 500 pixels wide.

A mobile-safe campaign version should keep both dimensions compact. Use a width between 320 and 385 pixels and a height no greater than 100 pixels when the campaign needs a dedicated mobile asset. A mobile email signature can use 320 pixels of width, while a desktop email signature can use 600 pixels of width and 150-200 pixels of height. These are separate display choices, not a promise that a desktop image will automatically resize cleanly everywhere.

A 650-pixel-wide banner with a height between 90 and 150 pixels is described as easily viewable without being obstructive in preview panes or on smartphones, but that description does not remove the need for a narrower mobile treatment. Mobile layouts have less horizontal space, so use responsive design or a mobile-specific version when the campaign environment supports it. Do not assume that the desktop canvas will remain readable after automatic scaling.

Choose the narrower version when the campaign reaches mobile users as part of its intended audience. Keep the action and essential message inside the 320-385 pixel width rather than placing important copy at the far edge of a wider desktop asset. Then validate the actual rendered result at the compact width before approving the campaign.

Separate display size, export size, and file weight

An email signature banner has three separate size decisions: the dimensions shown to recipients, the dimensions of the exported asset, and the file weight. Exporting at twice the display size can help keep the asset sharp. For example, a banner displayed at 600 pixels wide can be exported at 1,200 pixels wide, while the signature still reserves only 600 pixels of display width.

A static banner should aim for under 60 KB, while an animated GIF should aim for under 150 KB. The 60 KB figure measures the target weight of a static file, and the 150 KB figure measures the target weight of an animated file. Treat both figures as working targets for a campaign asset rather than universal limits imposed by every email client. If the asset exceeds the target, simplify the image or reduce unnecessary animation before changing the display dimensions.

Usable banner width can be 500-600 pixels when mobile screens constrain the signature. That range is narrower than the 650-pixel desktop starting point, so use it as a practical signal to prepare a more compact version when the campaign must fit a constrained layout. Keep the width and height relationship intentional; reducing width without reviewing text and artwork can make the action harder to understand.

A separate guideline for a 600-680 pixel container recommends exporting hero images at 1,200-1,280 pixels wide, displaying them at 600-640 pixels, and using a compressed JPEG in the 100-150 KB range. Those figures apply to a larger hero-image treatment, not automatically to a compact signature CTA. Keep the signature asset on its own display and file-weight target instead of combining the hero-image figures with the under-60-KB static-banner target.

An infographic showing email signature banner targets: under 60 KB for a static banner, under 150 KB for an animated GIF, and 1,200 pixels for an export displayed at 600 pixels. It separates file weight from display and export size.
Set file-weight targets independently from the banner’s displayed width.

Keep the email structure within a usable width

An email template uses a table-based layout, and many HTML and CSS properties that work on websites do not work in email. That constraint makes the surrounding structure part of the banner-size decision. A campaign banner can have suitable dimensions in an image editor and still create layout problems when the table, signature details, and image are assembled together.

Create the email template no wider than 700 pixels because many mail clients limit email width and a recipient might see a horizontal scroll bar. The 700-pixel figure measures the template width, not necessarily the banner width. Keeping the full structure within that boundary leaves room for the signature content and helps you evaluate the banner in the layout where it will actually appear.

A general email banner can use 300-400 pixels of width and 70-100 pixels of height at roughly 72 dpi. Those figures describe a smaller general-banner treatment and may suit a restrained signature placement, while the 650 × 100 pixel canvas remains the desktop starting point for the campaign decision. Select between them by checking the available container and the amount of message the banner must carry.

Email text should be no smaller than 12-13 pixels. The 12-13 pixel figure measures supporting email text, not the image dimensions. Some mobile clients can automatically increase text smaller than 12 pixels, which might interfere with the layout. Keep the text outside the banner readable as you reduce the image width, then check the combined signature rather than approving the image in isolation.

Use this structure check before rendering:

  • Keep the full email template at or below 700 pixels wide.
  • Keep the banner display width inside the actual signature container.
  • Check the table layout with the banner and contact details together.
  • Keep supporting email text at 12-13 pixels or larger.
  • Remove any width that creates horizontal scrolling before moving to campaign approval.

This sequence keeps the banner decision tied to the usable email structure.

Validate the chosen size before approval

A 320-pixel rendering test should be the first approval checkpoint for an email signature banner. On an iPhone SE or similar compact device, content that assumes more than 320 pixels of width can cause horizontal scrolling or zoom-to-fit and make the message unreadable. Test every template at 320 pixels before signing off, even when the desktop version uses a wider canvas.

Use a short validation sequence:

  1. Render the desktop banner at its intended display width.
  2. Render the narrower version at 320 pixels and, when relevant, across the 320-385 pixel mobile range.
  3. Check whether the banner height remains within the selected limit of up to 100 pixels for the mobile version.
  4. Inspect the action, essential copy, and visual hierarchy at each width.
  5. Test the different banner sizes with the email clients and devices used by your campaign audience.

The purpose is to compare actual rendering outcomes before approval, not to assume that a dimension will behave identically everywhere.

Different campaign audiences may justify different tested sizes. Test the desktop starting point against the narrower mobile version and compare whether each version keeps the action visible, the message understandable, and the signature proportionate. Guidance for campaign banners recommends testing different sizes and designs to see what works for your specific target audience. Approve the version that remains usable in the relevant contexts rather than selecting by width alone.

A banner is ready for approval only after the 320-pixel check and the relevant client-and-device checks produce a readable result. If the compact rendering introduces scrolling, zoom-to-fit, clipped content, or an unclear action, return to the dimensions and export settings. Use the narrower width, shorter height, or simpler asset that resolves the observed problem, then repeat the render.

Seek professional evaluation when requirements remain unresolved

Organization-specific email requirements can remain unresolved after you compare the desktop and mobile versions. Seek professional evaluation when client-specific behavior conflicts across the campaign’s required environments, when the signature container cannot accommodate the selected dimensions, or when a template requirement forces a choice between readability and layout stability.

Bring the intended display dimensions, export dimensions, file weight, template width, and rendered examples to that evaluation. A clear record of the 650 × 100 pixel starting point, the narrower mobile version, and the results of the 320-pixel test gives you a concrete basis for resolving the remaining requirement. Do not approve a banner while a known rendering conflict remains unexplained.

Create the tested campaign signature

An email signature campaign banner can begin at 650 × 100 pixels for desktop, move to a narrower mobile version when the layout requires it, and proceed only after the 320-pixel and audience-context checks are complete. Keep the display width tied to the actual signature container, keep export size separate from display size, and treat file-weight figures as working targets rather than universal client limits. A qualified professional can assess organization-specific suitability when unresolved rendering requirements remain.

Once the dimensions and rendered versions are approved, carry the tested asset into the campaign signature without changing its display width or message hierarchy during deployment.

Get started with Scribe

Build a professional email signature

Free 14-day trial — no credit card.

Keep reading

Stripe email signature – Patrick Collison
Notion email signature – Camille Ricketts

Start your 14-day
free trial

Join 10,000+ companies using Scribe to power 15 million daily brand impressions

No card required. All features. Unlimited users.

Nike email signature – Greg Hoffman
Headspace email signature – Andy Puddicombe